Crispy onion fryer with a deoiling centrifuge
For frying foods in oil, deep-frying, suitable for frying onions, seeds, nuts, vegetable snacks and chips, and other products, including breaded or covered in liaison. Can also be used as an oil separating centrifuge for deep fryer.
- Two in one: a deep fryer and a centrifuge to remove excess oil
- Possibility of frying small and fragile products
- Obtaining a “dry product†after frying
- Low carbonization of oil due to the cleaning feature after frying
An atmospheric electric immersion fryer with a centrifugal system for removing excess oil is used both for laboratory purposes in large enterprises and small food processing businesses that work with various products in smaller volumes.
A deep fryer with a system for removing excess oil is the optimal solution for frying sliced or chopped products and small raw materials such as:
|
|
|
|
|
|
|
Advantages:
- The installation allows you to process products with a fragile structure and a small size; the basket has sections inside which the product is evenly fried.
- Constant circulation of oil through the built-in filtration system extends the life of the oil and reduces its carbonization.
- After a quick frying in hot oil, the product closes its pores, ensuring maximum retention of the beneficial substances contained inside and preventing oversaturation with oil.
- The centrifuge separator allows you to obtain a 'dry' product after frying with a minimal oil content!
Basic version
The installation consists of a frying container with an oil heating and storage bath, a built-in electrically driven centrifuge, a special pump for hot oil and a piping system connecting the frying section with the heating section. The heating control is located directly on the units body; the centrifuge rotation speed can be adjusted through the inverter. The basic version includes one sectional basket with a lid.
Principle of operation
A special feature of the installation is the ability to remove residual oil from the product, obtaining a dry product at the output. To achieve this, a special system that spins the basket with the product after draining the oil is used, where due to the centrifugal force, drops of oil located on the surface of the product are sprayed onto the walls of the working container and flow through the drain hole into the container for storing and heating the oil.
Options:
- Additional basket
- Basket lifting system
- Material: Stainless steel
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l/ 90l
- Total power, kW: 11
- Voltage: 380-400V
The continuous pouring fryer is designed to fry meat, fish, vegetables and pasta products as well as chicken drumsticks, cutlets, nuggets, croutons, sliced zucchini or eggplant, and etc. using immersion frying and hot oil pouring methods.
For more information please send us an email at sales@vacufry.com
The price is set for the basic fryer version without additional modules. If purchasing the fryer together with both of the additional conveyor modules – the double conveyor and the paddle conveyor – we offer a discount of 300 EUR.
The versatile modular conveyor fryer with a single conveyor belt is used for the continuous frying of a variety of products with a low moisture content, that do not require forced immersion beneath the surface of the oil for even frying.
You can send us a request at sales@vacufry.com
- Adjustable frying time from a few seconds up to an hour!
- Ability to use the unit as a continuous blancher or boiler for cooking products with a delicate structure
- Modular system, expanding functions with each new module
- Compact, desktop version
- Possibility of periodic frying of products with automatic unloading
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Oil volume: 60l
- Voltage: 380-400V
Our continuous fryer is ideally used for frying escalopes, potatoes, croquettes and many other products.
The price is indicated with a semi-automatic control panel
The vacuum cooking kettle is designed for use in public catering establishments (restaurants, hotels, catering companies) and small manufacturing businesses. This equipment enables boiling, blanching, frying, evaporation, pasteurization, mixing or stirring.
- A unique multifunctional device
- Possibility to cook/fry under atmospheric or vacuum conditions
- Laboratory version of a Vacuum Fryer
- Built-in condensation and secondary steam removal system
- Intense electric heating
- Sectional basket with a lid
- Built-in system for separating and removing excess liquid from the product
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 5
- Volume: 20l
- Oil volume: 8l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
Semi-automatic donut fryers are extremely efficient machines designed for easier donut production.
A pouring fryer is a specialized equipment used in commercial kitchens for frying foods using a continuous pouring method. It offers precise control over the frying process by continuously pouring oil over the food, ensuring even cooking and consistent results.
Price depends on the chosen option. Please email sales@vacufry.com
Automatic donut fryers are extremely efficient machines designed for easier production of doughnuts.Â
The price is set based on the basic built-in heating option of 24 kW.
The vacuum fryer is designed for frying foods in oil at low temperatures, allowing for the production of healthy snacks such as vegetable and fruit chips. The vacuum feature enables you to reduce the frying temperature of oil down to 110-120 degrees!
- «Cold roast» is a tasty and healthy method of processing the product
- Drying and frying without caramelizing the sugars contained in the product
- Large frying tank - for processing foods with a higher water content
- Modular heating system which allows you to increase the heating power up to 108 kW (optional)
- Circulating heating of oil through a heat exchanger minimizes oil spoilage and prevents localized overheating
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 24
- Principle of operation: Batch mode
- Country of origin: Slovakia
- Volume: 30l
- Oil volume: 200l
- Voltage: 380-400V
- Max vacuum: -0,8 Bar
We can help you choose the right continuous fryer suited for your needs.
For a free consultation or a quote, please send us an email at sales@vacufry.com
The price is set for the combination of a basic fryer model and an additional module with rotating paddles.
The universal modular fryer equipped with an additional paddle module is designed for frying thin slices of products that require immersion beneath the oil level.
You can send us a request at sales@vacufry.com
- Adjustable frying time from a few seconds up to an hour
- Compact, tabletop version
- The paddle conveyor is installed on top of the basic fryer
- Safety thermostats on each heating element
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Total power, kW: 12
- Oil volume: 60l
- Voltage: 380-400V
The compact tabletop paddle fryer can be used for the production of a variety of snacks, including vegetable and fruit chips fried in oil. It is also suitable for frying extruded chips and snacks.
- Innovative design: a compact continuous paddle fryer for professional kitchens
- Intensive three-zone heating using thermal controllers for each heating element
- Specially designed blades along the entire length of the fryer to immerse the product in oil
- Frying time can be set from a few seconds up to an hour
- Product agitation system during loading for product separation
- Thermal insulation of the working body to reduce heat loss and for safer operation
- Heating: Electricity
- Material: Stainless steel
- Heating power, kW: 12
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Length: 1100 mm
- Working Area Width: 400 mm
- Voltage: 380-400V
The paddle module for the 400/1100/12 Universal Tabletop Modular Fryer is a conveyor with specially curved paddles for gentle frying of fragile and light foods.
For additional information, please contact us at sales@vacufry.com
We sell different types of deep fryers, for a price quote or for a free consultation, send us an email at sales@vacufry.comÂ
A continuous production line for deep-frying semi-finished products.
- Frying products both below and above the oil level is possible thanks to the option to select the type of the upper conveyor or easily replace it with another one, depending on the product.
- The frying time can be adjusted from just a few seconds up to an hour, allowing you to fry products with varying frying durations, something that is nearly impossible with any other continuous conveyor fryer.
- Compact design, it includes all essential processes, such as oil storage and filtration.
- Heating: Electricity
- Material: Stainless steel
- Principle of operation: Continuous mode
- Country of origin: Slovakia
- Working Area Width: 400 mm
- Voltage: 380-400V
The VFB vacuum fryer with a built-in blancher is intended for drying and frying a wide range of products as well as for the production of chips and crisps from potatoes, carrots, onions, celery, parsley, beetroot and many other types of fruits, vegetables, and different snacks made out of meat, pork skin and fish.
For additional information, please contact us at sales@vacufry.com
We have various types of continuous or batch fryers. Just tell us what kind of product you wish to fry and we will help you choose the right deep fryer.
For a quote or additional information, send us an email at sales@vacufry.com